This tutorial is for making a double jumping sackbot.
STEPS:
1. Place a microchip on the sackbots chip.
2. On that microchip, place a counter with the count of 2.
3. place an impact sensor with the settings: include touching-Yes, Require tag-No.
4. Connect the X button to the counter, and the impact sensor to the reset of the counter.
5. Place a sequencer and wire the counter to the start playing setting on the sequencer. and make sure that the sequencer doesn't loop.
6. on the sequencer, place a mover with the up/down speed of 4 and the sequencer speed should be around 0.3 secs per stripe.
7. Make the sackbot controllable.
STEPS:
1. Place a microchip on the sackbots chip.
2. On that microchip, place a counter with the count of 2.
3. place an impact sensor with the settings: include touching-Yes, Require tag-No.
4. Connect the X button to the counter, and the impact sensor to the reset of the counter.
5. Place a sequencer and wire the counter to the start playing setting on the sequencer. and make sure that the sequencer doesn't loop.
6. on the sequencer, place a mover with the up/down speed of 4 and the sequencer speed should be around 0.3 secs per stripe.
7. Make the sackbot controllable.